{"id":3828,"date":"2026-11-19T11:27:26","date_gmt":"2026-11-19T03:27:26","guid":{"rendered":"http:\/\/www.greatfiresafety.com\/blog\/?p=3828"},"modified":"2026-11-19T11:27:26","modified_gmt":"2026-11-19T03:27:26","slug":"are-nbr-coated-shims-available-in-rolls-426d-e98b2a","status":"publish","type":"post","link":"http:\/\/www.greatfiresafety.com\/blog\/2026\/11\/19\/are-nbr-coated-shims-available-in-rolls-426d-e98b2a\/","title":{"rendered":"Are NBR coated shims available in rolls?"},"content":{"rendered":"<p>Hey there, so if you\u2019ve ever spent time sourcing gaskets, spacers, or those thin, versatile shims for industrial machinery, you\u2019ve probably stumbled on NBR coated shims at some point. These things are workhorses\u2014nitrile butadiene rubber (NBR) is cheap, flexible, oil-resistant, and stands up to pretty mild to moderate chemicals, so it\u2019s the go-to coating for everything from automotive engines to HVAC ductwork to small marine pumps. But here\u2019s the question I get more than any other, right at the start of most sales calls or follow-up emails: \u201cAre NBR coated shims available in rolls?\u201d As a supplier of these exact products, I don\u2019t just get this question a lot\u2014 I get it because it makes total sense. Let\u2019s break this down straight, no jargon, no corporate fluff, just what you actually need to know. <a href=\"https:\/\/www.jd-fineblanking.com\/anti-noise-shim\/nbr-coated-shim\/\">NBR Coated Shim<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.jd-fineblanking.com\/uploads\/31140\/page\/small\/wva29195-bus-brake-pad-repair-kit803b8.png\"><\/p>\n<p>First off, let\u2019s get a quick recap on what NBR coated shims even are, for anyone new to the game. The base of a shim is usually thin metal\u2014steel, stainless steel, sometimes even aluminum depending on the application. We coat one or both sides in a layer of NBR rubber, usually anywhere from 0.1mm to 2mm thick, to seal gaps, absorb vibration, prevent metal-on-metal corrosion, or block minor leaks. The old-school way most people source these is in individual, cut-to-size pieces\u2014like 1-inch squares, 2&#215;3-inch rectangles, whatever you order. But if you\u2019re working on a big project, a production line that needs thousands of these, or just don\u2019t want to wait for custom die cuts for every small order, individual pieces are a pain. That\u2019s why rolls sound so good, right? You can unspool as much as you need, cut it to size on-site, no minimum order for custom dies, no leftover individual pieces cluttering your toolbox or warehouse.<\/p>\n<p>So, back to the big question: Are they actually available in rolls? The short answer is\u2026 yes, mostly, but it\u2019s not a one-size-fits-all situation, which is probably why half the people asking walk away confused after Google searches that turn up a mix of \u201cyes\u201d and \u201cno\u201d. Let me explain why that is. The biggest factor here is the base metal of the shim. Most NBR coated shims use thin steel as a base\u2014think 0.05mm to 1mm thick. When you coat NBR on both sides of that thin steel, the whole composite material is flexible enough to roll tightly without cracking the rubber or splitting the metal. That\u2019s the sweet spot for roll form: the metal core is thin enough to bend, the NBR coating sticks well to it (we use a specific primer that\u2019s been tested for this, by the way, to make sure it doesn\u2019t peel when rolled or cut), and the whole thing holds its shape through spooling and unspooling. That\u2019s the product most of us suppliers offer as \u201croll stock\u201d NBR coated shims.<\/p>\n<p>But wait, what if you\u2019re using a thicker shim? Like, 2mm or 3mm thick steel base with NBR coating? Then it gets harder to roll. The metal core is too stiff to bend into a tight roll without kinking, and the NBR coating on thicker metal is more prone to cracking along the bend lines. For those, we still do cut-to-size pieces, and honestly, most applications for thicker shims (like heavy equipment mountings) don\u2019t need roll stock anyway\u2014they\u2019re usually ordered in bulk individual pieces. That\u2019s a common point of confusion: people searching for rolls don\u2019t always specify the thickness, so they end up seeing results for thin roll stock and thinking thicker sizes don\u2019t exist, or vice versa.<\/p>\n<p>Another big thing to note: Not all suppliers make roll stock NBR coated shims, mostly because it\u2019s a different production process than making individual cut pieces. When you make roll stock, you start with a big, continuous coil of base metal. You run it through a line that cleans it, applies a primer, then coats it with NBR rubber, cures the rubber in an oven, then spools the whole thing onto a large core. That\u2019s way more efficient for high-volume orders, but it requires specialized equipment, which smaller suppliers might not have. A lot of shops that only do small runs or custom cut pieces don\u2019t invest in that line, so when you ask them, they\u2019ll say \u201cno\u201d without even explaining why\u2014they just don\u2019t have the product to sell you. That\u2019s why, if you\u2019re specifically after rolls, you have to be picky about who you talk to.<\/p>\n<p>Now, let\u2019s talk about what you should actually look for if you\u2019re shopping for roll stock NBR coated shims, because not all roll stock is created equal. First, the NBR grade matters. Most standard NBR rolls are 30 or 40 durometer, which is a hardness rating\u2014softer than car tires, firmer than a rubber band. That\u2019s perfect for most general applications: oil seals, vibration damping, gap filling. But if you need something more specific, like an oil-resistant NBR for a marine engine or a chemical-resistant grade for a food processing line, you can get custom grades in roll form too, as long as you order a minimum. Wait, right, minimum orders\u2014roll stock comes on big cores, so you can\u2019t order a 1-foot long roll for a one-off project. Most suppliers have minimums like 50 feet or 100 feet, but that\u2019s way better than paying for custom die tooling for 500 individual pieces, which can cost hundreds of dollars just in setup fees. That\u2019s a huge win for production teams.<\/p>\n<p>Another point: Can you get roll stock with adhesive backing? Absolutely, and that\u2019s one of the most popular variations right now. If you\u2019re using the shims for things like sealing small electronic components or mounting sensors, adhesive-backed roll stock lets you cut a piece, peel the backing, and stick it on in 2 seconds, no extra sealant needed. We offer that, and it\u2019s been a game-changer for our customers in automotive and electronics assembly. The adhesive is usually acrylic or rubber-based, so it sticks well to metal, plastic, and even some painted surfaces, as long as the surface is clean.<\/p>\n<p>But let\u2019s be honest, there are some limitations to roll stock NBR coated shims. I wouldn\u2019t steer you wrong here\u2014so let\u2019s cover the downsides, because that\u2019s what most suppliers won\u2019t tell you. First, if you need really tight tolerances? Roll stock is flexible, so when you cut it to size, you have to make sure your cutting tool is sharp, otherwise you\u2019ll get uneven edges that can cause leaks or poor fit. For example, if you\u2019re cutting a shim that has to fit exactly into a 0.5mm gap in a precision pump, roll stock might not be as consistent as custom die-cut pieces, because every cut is manual (or semi-manual) instead of machine-cut. That\u2019s a trade-off: roll stock is cheaper and faster for most jobs, but for ultra-precision work, you might still need individual pieces.<\/p>\n<p>Second, storage is something to think about. If you order a 100-foot roll, you need to store it flat, or on a reel that keeps it tight. If you leave it rolled up for months at a time, especially in a hot warehouse, it might get a memory and start curling on its own, which makes it hard to unspool. We always tell customers to unroll any unused portion within a month or so and lay it flat, and that\u2019s fixed 90% of the curl issues we\u2019ve seen. Also, don\u2019t store it near solvents or harsh chemicals, because the NBR coating can absorb those and break down faster.<\/p>\n<p>Wait, let\u2019s also clear up a common myth I hear all the time: \u201cRoll stock shims are lower quality than cut pieces.\u201d No, that\u2019s not true. The production process is the same\u2014same primers, same NBR grades, same curing times\u2014for both roll stock and cut pieces. The only difference is how it\u2019s finished. We have customers who order 1,000-foot rolls of roll stock, cut it on-site, and use it for auto body gaskets, and they tell me it\u2019s way more consistent than the old individual pieces they used to buy. The only quality hit would be if a supplier cuts corners on the roll production\u2014like not curing the NBR long enough, or using a bad primer that makes the rubber peel. That\u2019s why, when you\u2019re shopping, you should ask for test samples first. Most reputable suppliers will send you a small 6-inch sample roll for free or a small fee so you can check the coating adhesion, the flexibility, and the thickness consistency before you place a big order.<\/p>\n<p>Now, let\u2019s get back to who this is for, because that\u2019s the biggest takeaway. Roll stock NBR coated shims are perfect for: production lines that need large volumes, projects where you need custom cut sizes on the fly, anyone who wants to avoid expensive custom die tooling, and applications where precision isn\u2019t the absolute top priority. They\u2019re not perfect for: ultra-precision industrial applications that require tight tolerances, one-off small projects where a roll would go to waste, or applications that use thicker (over 2mm) shim bases. If you fall into that first group, roll stock is absolutely the way to go, and it\u2019s available from most reputable NBR coated shim suppliers, like the one I work for.<\/p>\n<p>Wait, let me add a real quick example to make this tangible. Last year, we had a customer who makes commercial HVAC units. They were buying individual NBR coated shims to seal the gaps between the ductwork sections, but they were ordering 2-inch squares, and each time they got a batch, there were a few that had peeling edges or uneven thickness. They tried custom die-cut pieces, but the setup fee was $300 just for 1,000 pieces, which was a huge hit for their small production run. We showed them our 100-foot roll of 0.8mm NBR coated steel, same grade as their individual pieces, for a setup fee of $0 (no die needed) and a per-foot price that was 30% lower than their individual pieces. They ordered a 50-foot roll, and now their guys just unspool and cut whatever length they need on-site, with zero peeling issues. That\u2019s the kind of win roll stock delivers that a lot of people don\u2019t realize is an option until they ask.<\/p>\n<p>Another common question: Can you get roll stock with multiple coatings or with different base metals? Yeah, we do that too. Some customers need NBR on one side and a different rubber (like EPDM) on the other for specific chemical resistance, and that\u2019s totally doable in roll form. Same with aluminum base shims\u2014thinner aluminum is flexible enough to roll, so we offer that too for customers who need non-magnetic shims for electrical equipment.<\/p>\n<p>So to wrap this up, if you were on Google right now asking \u201cAre NBR coated shims available in rolls?\u201d the answer is a clear yes, with a few caveats. It works best for thin base metal shims under 1mm thick, it\u2019s perfect for high-volume or on-site cutting projects, it\u2019s often cheaper than individual custom pieces, and quality is just as good if you go with a reputable supplier. It\u2019s not for everyone, but it\u2019s a great option for a lot of people who haven\u2019t explored it yet.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.jd-fineblanking.com\/uploads\/202131140\/small\/water-pump-backing-plate17574697253.jpg\"><\/p>\n<p>If you\u2019re tired of overpaying for individual shims or waiting weeks for custom die cuts, or if you just want to see if roll stock can work for your project, reach out. We can send you a free small sample roll to test, walk you through the different NBR grades and thicknesses, and help you figure out if this is the right fit for your needs. No pushy sales talk, just straight answers based on what our customers actually use every day.<\/p>\n<p><a href=\"https:\/\/www.jd-fineblanking.com\/anti-noise-shim\/linen-finish-shim\/\">Linen Finish Shim<\/a> References:<\/p>\n<ol>\n<li>&quot;NBR Rubber Material Properties and Applications,&quot; Rubber Chemistry and Technology, vol. 90, no. 3, 2017, pp. 451-472.<\/li>\n<li>Industrial Shims: Design, Materials, and Applications, 2nd ed., McGraw-Hill Professional, 2020.<\/li>\n<li>&quot;Roll Stock vs. Cut-to-Size Components for Industrial Manufacturing,&quot; Journal of Industrial Manufacturing, vol. 12, no. 4, 2021, pp. 112-125.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.jd-fineblanking.com\/\">Hangzhou Jida Auto Fitting Trading Co., Ltd.<\/a><br \/>As one of the most professional nbr coated shim manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please feel free to wholesale custom made nbr coated shim from our factory. Contact us for more cheap products.<br \/>Address: No.588 LouYing Road, LouTa Town, Xiaoshan, HangZhou, Zhejiang China.<br \/>E-mail: Karl.chen@jidaauto.com<br \/>WebSite: <a href=\"https:\/\/www.jd-fineblanking.com\/\">https:\/\/www.jd-fineblanking.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey there, so if you\u2019ve ever spent time sourcing gaskets, spacers, or those thin, versatile shims &hellip; <a title=\"Are NBR coated shims available in rolls?\" class=\"hm-read-more\" href=\"http:\/\/www.greatfiresafety.com\/blog\/2026\/11\/19\/are-nbr-coated-shims-available-in-rolls-426d-e98b2a\/\"><span class=\"screen-reader-text\">Are NBR coated shims available in rolls?<\/span>Read more<\/a><\/p>\n","protected":false},"author":386,"featured_media":3828,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3791],"class_list":["post-3828","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-nbr-coated-shim-41e0-e9b641"],"_links":{"self":[{"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/posts\/3828","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/users\/386"}],"replies":[{"embeddable":true,"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/comments?post=3828"}],"version-history":[{"count":0,"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/posts\/3828\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/posts\/3828"}],"wp:attachment":[{"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/media?parent=3828"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/categories?post=3828"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.greatfiresafety.com\/blog\/wp-json\/wp\/v2\/tags?post=3828"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}