Hook-through Steel Beam Shot Blasting And Spraying Machine

Hook-through steel beam shot blasting and spraying machine

Hook pass through type steel beamsshot blast and paint machineQAT3730 Hanger/Hook pass through type shot blasting machine are specifically designed for treating components continuously conveyed through a blast chamber suspended on an overhead conveyor. It is suitable for the treatment of products of middle/large sizes handled ho

Hook pass through type steel beams
shot blast and paint machine

QAT3730 Hanger/Hook pass through type shot blasting machine are specifically designed for treating components continuously conveyed through a blast chamber suspended on an overhead conveyor. It is suitable for the treatment of products of middle/large sizes handled horizontally of products, such as clean many kinds of profile steel and structural steel.

QAT3730 shot blasting machine technical parameter:

The parts max size: φ3000×4400mm
Hook:
              Max hanging capacity: 2.8t
              Running speed: 11m/min
              LIfting speed: 5.6m/min
Blast wheel:
              Turbine quantity: 6sets
              Impeller diameter: Φ420     mm
              Total blasting capacity: 6*230 kg/min
              Total power: 6*11 kW
Wind amount:
               Total amount: 25000 m³/h

The equipment total power: about 125.65 kW

The handling of the work-pieces can be done by couple of hoists, overhead conveyor or driven trolleys at ground level.

The blast operation is done in one pass on the whole component surface throughout the crossing of the tunnel.

The blasting process takes places as the work to be treated passes through the chamber with blast wheels located on both sides of the cabinet, inclined to give full coverage of the work.

Downstream the blasting tunnel, it is possible to install manual blasting machine for re-touching or blowing /suction cabinet to remove possible residue shot on the work-pieces.

Our hanger pass through type shot blasting machines may be fitted into automatic lines with painting rooms, using a power and free overhead conveyor system.

Typical work pieces treated with shot blasting machine TUNNELBLAST are:

Profile steel, such as, H beam steel, I beam steel, Channel steel, angle steel etc.

Structural steel work for:

·Civil and industrial buildings (sheds, bridges, viaducts, stadiums, warehouses, walkways, platforms, stairs, etc.)

·Agricultural equipments

·Earth moving equipments

·Buildings and road equipments

·Lifting machines

·Bridge crane

·Industrial vehicles

·Truck chassis

·Railway trolleys