Odor latex paint coating

Inodor Emulsion Wall Paint CoatingsFeatures:1. High performance but low price                2. Strong hiding power3. Easy application4. Good leveling property    &n

Featured Products

Inodor Emulsion Wall Paint CoatingsInodor Emulsion Wall Paint Coatings

Features:
1. High performance but low price                
2. Strong hiding power
3. Easy application
4. Good leveling property     

 
Technical Indexes
 
AppearanceWhite uniform viscous liquid
GlossMatt
Solids content57.86±2%
Specific gravity1.493±0.05
VOC<50g/L
Contrast ratio> 0.90
Alkali resistance (24 h)Coating no changes
Emulsion ratio11%~15%
Stability ( -5ºC)No Degenerating
Scrubbing resistance> 5000 times
PigmentNon-lead pigment
BinderAcrylic copolymer
Solvent Water
Application methodBrush   Roller   Spray guns
Theoretical coverage8~10/ kg / coat 
Mixing ration with water10% ~ 15% of water 
Touch drying / Recoat  time25 min/ 25ºC / At least 2 hours
Application environmentHumidity ≤85% , temperature ≥5ºC
Tools cleanClean the tools with water
StorageCold & dry places, avoid freezing
Packing5L=6kg   18L=22kg
 
Typical Painting System
SURFACESYSTEM
Normal, Sound SurfacePrimer: Maydos Anti-alkali Primer W1210 (1 coat)
Topcoat: Maydos Interior High-Class Emulsion Wall Paint AN3006 (2 coats)
 
 
 
 
Surface Preparation
 
Surfaces must be thoroughly clean, dry and free from all loose dirt, chalk or powder. New surfaces such as plaster and concrete should be fully dry before painting.
New Wall1. Fresh concrete must cure at least 30 days and meet application requirement before plastering.
2. The plaster must not be too soft. Sand and dust off after dry.
3. To resist alkalis and to obtain best results first apply one coat of Maydos anti-alkali primer W1210
Previously Painted Surface1. Remove powdery or flaking paint by scraping followed by using a suitable abrasive paper and dusting off.
2. Fill the defects with proper filler
3. To seal powdery surfaces and to obtain best results first apply one coat of Maydos anti-alkali primer W1210
 Fungus Growth Wall1. Remove all the fungus by scraping followed by using a suitable abrasive paper and dusting off
2. Wash the surface with appropriate fungus washing. Rinse with clean water and wait till dry
3. To obtain best results first apply one coat of Maydos anti-alkali primer W1210
 
Notes for use:
l Mix well after paint can is opened.
l To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.
l Recoat interval should be prolonged in winter. To prevent the surface from erosion and avoid the precipitation of alkaline component, wall surface drying time should be relative long 
l Stop application when temperature is below 10ºC, or humidity over 85%.
l Apply with Maydos matching primer for best performance.
l For information of Manufacture Date, Lot No., Net weight and Expiring Date, please refer to the product label. 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours