Technical data sheet
|particle size||10-30um||Spray method||electostatic spray gun|
|Pencil hardness||ASTM D-336||≥ 2H||PASS|
|Impact resistance||ASTM D-2794||≥ 120in.ib||PASS|
|Adhesive force||ASTM D-3359||100%(5B)pas||PASS|
|Flexing endurance||ASTM D-522||1/8'inch(3mm)||PASS|
|Salt spray resistance||ASTM B-117||240 hours||PASS|
|UV resistance||ASTM G-154||500 hours||ΔE≤6|
|Remark(Important)||1. The above test use cold-rolled steel (thickness: 0.8mm) to remove rust and oil. Suggested film thickness: 60-80 um|
2. The overall quality of the coating systerm is largely dependent on the type and quality of the pre-treatment.
3. The product must be stored in ventilated,dry and clen room with temperature below 25ºC,keep it away from fire and direct sunlight. The period of validity is 6 month.
4. There are no hazardous ingredients contained.Wearing anti-dust mask and goggles to avoid inhalation of dust.Try best to avoid longtime contact with powder.The coating adhesion to the skin can be washed with soap.