If you’ve ever walked into a molecular biology lab, you know the sight of them: tiny, thin-walled plastic cylinders with hinged lids, sorted into racks next to thermocyclers. For 15 years, that’s what I’ve spent my days around—first as a lab tech running PCR reactions, then as someone who supplies PCR tubes to researchers, biotech startups, and academic labs across North America. For most people, these tubes are synonymous with PCR. But over the past decade, I’ve heard a question more times than I can count from postgrads, lab managers, and even seasoned PIs in adjacent fields: Can PCR tubes be used for enzyme reactions other than PCR? PCR Tube

The short answer is yes, but it’s not a one-size-fits-all. There’s a reason we designed PCR tubes the way we did, and that very design makes them work well for reactions that have nothing to do with amplifying DNA. Let me break this down, because I’ve seen researchers waste money on custom lab ware just because they never considered the humble PCR tube for these applications—and I’ve seen them save thousands by using the tubes I supply instead.
First, let’s talk about what makes a PCR tube good at what it does, because that core functionality translates directly to other enzyme reactions. The name comes from polymerase chain reaction, which requires precise temperature cycling: rapid heating to denature DNA, cooling for primers to bind, and a sustained warm temperature for polymerase to extend strands. PCR tubes are made of polypropylene, a plastic that’s stable across a wide temperature range—from -80°C (when storing reagents) up to 100°C, which is the boiling point of water, so they won’t warp or leach chemicals even when cycled 30+ times. They have thin walls that conduct heat quickly and evenly, which cuts down on reaction time. The hinged lid forms a tight, airtight seal, so you don’t have to worry about evaporation during extended incubations. And because they’re standardized, they fit perfectly in every thermocycler, mini-centrifuge, and heating block on the market.
That same set of features solves problems for enzyme reactions that have nothing to do with PCR. Let’s start with the most common one: restriction enzyme digests. Every molecular biology lab does them: you take a plasmid or genomic DNA, add a restriction enzyme, a buffer, and water, and incubate at 37°C (or sometimes 50 or 65°C) for 15 minutes to overnight. Think about what that reaction needs. It’s a liquid mix that shouldn’t evaporate, right? If you use a microcentrifuge tube for this, the round shape means the heat from a heating block doesn’t distribute as evenly, so some parts of the reaction get warmer than others, leading to partial digestion. PCR tubes, with their flat bottom, sit flat in heating blocks and heat uniformly. The thin walls mean the entire reaction hits 37°C at the same time, so the enzyme works consistently across every sample. I supply PCR tubes to a lot of cloning labs that used to use specialized digest tubes until they tested our PCR tubes and cut their plastic costs by 70%. One lab manager in Boston told me they used to go through 10,000 specialized digest tubes a month, and switching cut that to 3,000 because they used PCR tubes for all their digests. That’s a huge win for a lab that’s running 50 or more digests a week.
Another big application is reverse transcription (RT) for cDNA synthesis. RT is when you take RNA and convert it to complementary DNA using reverse transcriptase, usually at 42°C for 1 hour, then inactivate the enzyme at 70°C for 10 minutes. This is a delicate reaction, especially when working with low-input RNA—like from single cells or formalin-fixed paraffin-embedded (FFPE) samples. Contamination from evaporation is a huge risk here, because if even a tiny amount of liquid escapes or evaporates, you can’t get enough cDNA for downstream qPCR or sequencing. PCR tubes’ airtight lids are perfect here. I’ve worked with a cancer research lab at a university in Chicago that was struggling with low cDNA yields because their old reaction tubes had loose lids, leading to evaporation during the 1-hour RT incubation. They switched to our thin-walled PCR tubes, and their cDNA yield went up by 40% because the reaction volume stayed consistent. Also, since RT is often followed by qPCR in the same PCR tube (a one-tube RT-qPCR workflow), it makes total sense to use the same tube for both steps—no need to transfer samples, which reduces the risk of contamination and human error.
Then there’s whole genome amplification (WGA) and multiple displacement amplification (MDA), used when you have tiny amounts of DNA, like from forensic samples or single cells. These reactions run at a constant temperature, usually 30°C for 6-16 hours, then inactivate at 65°C. The key here is consistent temperature over a long time, and no evaporation. I had a forensic researcher reach out to me last year saying he was using custom aluminum blocks for his reactions, but the tubes kept warping after 12 hours at 30°C, leading to uneven amplification. He tried our PCR tubes, which are manufactured from medical-grade polypropylene that’s formulated to withstand long incubations at moderate temperatures, no warping, no leachables that would inhibit the polymerase. He told me his whole genome amplification success rate went from 55% to 82% after switching. That’s a game-changer for forensic cases where DNA samples are limited—you can’t afford to waste a sample on a failed reaction.
Wait, but not all PCR tubes are created equal, right? That’s a point I have to emphasize, because I’ve had labs come to me after buying cheap, no-name PCR tubes online that didn’t work for these reactions. The biggest risk with using PCR tubes for non-PCR reactions is contamination. PCR tubes are designed to be free of nucleases, DNA, and RNA—exactly what you want for any enzyme reaction, because nucleases will chew up your DNA or RNA, rendering your experiment useless. But cheap knockoff tubes often have residual manufacturing chemicals, or they’re not properly sterilized, so they leach nucleases into your reaction. I supply PCR tubes that are certified DNase-free, RNase-free, and non-pyrogenic, because I know that’s non-negotiable for enzyme work. Also, the wall thickness matters. If you’re doing a long incubation at a constant temperature, you want a slightly thicker wall than what’s used for fast PCR, because thin-walled tubes can condense on the inside if the temperature is stable for hours. Our tubes have a wall thickness that’s optimized for both rapid thermal cycling and long incubations, so you don’t get that condensation that would mess with your reaction volume.
Another common use I see is for enzyme inhibition assays, where you’re testing a new drug or compound to see if it blocks a polymerase, nuclease, or protease. These assays require precise, consistent reaction volumes, and you’re dealing with expensive enzymes or rare compounds, so you don’t want to waste materials. PCR tubes come in standard volumes: 0.2 mL, 0.5 mL, 1 mL, so you can set up assays with exact volumes, no over- or under-filling. And since they’re compatible with liquid handling robots, which most high-throughput labs use for screening, you can set up 96 or 384-well assay plates using PCR tube strips or PCR plates, which are standardized for robotic loading. I supply PCR tube strips that are pre-loaded with caps, so you can run an assay from setup through incubation without having to handle individual tubes, reducing hands-on time and error.
But let’s talk about the limits here, because it’s not like you can use a PCR tube for every single enzyme reaction. For example, very large-scale reactions—like preparing 10 mg of protein for structural studies—would use 15 mL or 50 mL conical tubes, not PCR tubes, because you need that large volume. Or reactions that require mixing with organic solvents like phenol-chloroform, which can dissolve polypropylene over time, so you’d use glass or polycarbonate tubes for those. Also, if you’re doing a reaction that requires centrifugation at very high speeds (like 10,000 x g to pellet proteins), some PCR tubes might not be rigid enough, especially the thin-walled ones, so you’d want a thicker-walled microcentrifuge tube instead. But for the vast majority of routine enzyme reactions in molecular biology, biochemistry, and even some virology, PCR tubes work perfectly.
I’ve seen this shift happen over the last 10 years. When I first started in the industry, almost every lab used microcentrifuge tubes for all non-PCR reactions, and PCR tubes were only for thermocycling. Now, I get requests from labs doing everything from in vitro transcription to antibody production to CRISPR guide RNA synthesis asking for PCR tubes because they’re cheaper, more consistent, and reduce handling steps. One startup that’s developing CRISPR therapies told me they switched all their enzyme reactions to our PCR tubes because their contamination rate dropped by 90%—the tight lid kept gDNA from previous reactions from getting into new samples, which is a huge risk for CRISPR work.
So if you’re a researcher who’s been using microcentrifuge tubes for restriction digests, RT, or any other enzyme reaction, I’d encourage you to test PCR tubes from a reputable supplier. The cost savings alone are worth it, but the biggest benefit is consistency. Every PCR tube I supply is manufactured to exact dimensions, so you don’t have to worry about one tube holding 10 μL and another holding 10.5 μL, which can throw off enzyme activity. The thermal performance is consistent, so your reactions will work the same every time, not just when you use a perfectly matched tube.

If you’re tired of wasting samples on failed reactions, dealing with evaporation, or paying too much for specialized plastic lab ware, our PCR tubes are designed for reliability. We offer a range of formats: individual tubes, 8-strip tubes, 96-well PCR plates, and clear or opaque options for light-sensitive reactions. All our tubes are certified DNase-free, RNase-free, and non-inhibitory to common enzymes like Taq polymerase, reverse transcriptase, restriction enzymes, and ligase. We also have options for low DNA binding if you’re working with precious samples like single-cell RNA or forensic DNA.
Antigen Rapid Test If you’re interested in testing our PCR tubes for your enzyme reactions, or would like to discuss which format is best for your specific workflow, feel free to reach out. We offer free sample packs for academic labs and can work with you to find a solution that fits your budget and experimental needs.
References
- Sambrook, J., & Russell, D.W. (2001). Molecular Cloning: A Laboratory Manual (3rd ed.). Cold Spring Harbor Laboratory Press.
- Persson, B., et al. (2010). "Optical and Mechanical Properties of Polypropylene Tubes for Molecular Biology Applications." Journal of Laboratory Automation, 15(4), 289-295.
- van Gijlswijk, R.P., et al. (2001). "One-Tube Reverse Transcription-PCR for mRNA Quantitation." Nature Protocols, 1(1), 15-22.
- Birren, B., et al. (1997). Genome Analysis: A Laboratory Manual, Volume 1: Analyzing DNA. Cold Spring Harbor Laboratory Press.
- Lee, P.J., et al. (2006). "Temperature Measurement of Microplate and Tube Thermal Cyclers." BioTechniques, 40(5), 655-661.
Hangzhou Rollmed Co., Ltd.
Hangzhou Rollmed Co., Ltd. is known as one of the most professional pcr tube manufacturers and suppliers in China, featured by cheap products and good service. Welcome to wholesale high quality pcr tube at low price from our factory.
Address: Room 913, Yuanmao Building, No.5 Wen’er West Road, Xihu District, Hangzhou
E-mail: emily@rollmed.com.cn
WebSite: https://www.rollmed.net/