Posted in

does a purification system remove chloramine

If you’ve ever stood in your local hardware store, staring at shelves brimming with water purification systems, you’ve probably wondered the same thing I get asked every single week: does a purification system actually remove chloramine? Let me cut to the chase – as a supplier of these systems, I don’t sell magic solutions. What I do provide is science-backed products that work, and chloramine removal is one of the most common questions I help customers troubleshoot, so let’s break this down like we’re chatting over a coffee (or a glass of perfectly purified water, obviously). Purification System

First, let’s get the basics straight, because so many people mix up chloramine and chlorine, and that’s where half the confusion starts. Chlorine is the classic water disinfectant – the stuff that gives tap water that sharp, chemical smell, especially when it’s fresh out the tap. It’s been used for over a century to kill bacteria, viruses, and other pathogens, making tap water safe to drink. But over the last few decades, more and more water utilities have switched to chloramine – a mix of chlorine and ammonia – as a longer-lasting disinfectant. The big upside for utilities is that chloramine stays in the water longer as it travels through old pipes, so it continues killing germs all the way to your home. The downside? It’s way trickier to remove than plain chlorine. That’s why my phone rings off the hook with people saying, “My system removes chlorine, but now my water smells weird, or I’m getting skin rashes from my shower?”

Let’s talk about why that difference matters for purification systems. Plain chlorine is a pretty easy target: activated carbon filters (the kind in most under-sink pitchers or basic faucet filters) bind to chlorine molecules and pull them out of water like a magnet. Chloramine, though, is a stable compound. The ammonia in chloramine makes it much more resistant to standard activated carbon. I learned this early on in my role – a customer would buy a $20 pitcher filter, use it for a month, then come back furious saying “it doesn’t work” because they still detected chloramine. The problem wasn’t the filter being broken; it was that it was never designed for chloramine. Basic carbon filters do almost nothing against it. That’s when I started pushing my team to educate every customer we work with to ask: what’s in my water, and what do I need to remove?

Now, not all purification systems are created equal when it comes to chloramine. Let’s walk through the types we supply, and how each performs. First, reverse osmosis (RO) systems. RO is one of the gold standards for removing small contaminants, and chloramine is no exception. The semipermeable membrane in an RO system has tiny pores (less than 0.0001 microns) that are too small for chloramine molecules to pass through. I’ve tested this dozens of times in our lab – we take tap water with a typical chloramine level of 2-4 parts per million (ppm), run it through our RO system, and the post-filter water tests at less than 0.1 ppm, which is undetectable by most home test kits. The catch here is that RO also removes other beneficial minerals, like calcium and magnesium, which is a tradeoff many people are happy to make if they’re dealing with chloramine, lead, or other heavy metals.

Next up, specialized activated carbon systems – not the basic kind you get in a pitcher, but catalytic activated carbon (CAC) or carbon block filters that are designed to target chloramine. Here’s the science: regular activated carbon just adsorbs chloramine, but it doesn’t break it down. Catalytic carbon, on the other hand, has been treated to have a chemical reaction that splits the chloramine into its two components: chlorine and ammonia. Then the carbon binds to the newly freed chlorine, leaving almost no chloramine in the water. We design our carbon block filters with extra catalytic carbon and a higher contact time – meaning the water sits in the filter longer – to ensure that reaction happens completely. I had a customer last month who runs a small aquarium – chloramine was killing her fish, and RO was stripping the water of the minerals her fish needed. The catalytic carbon system we supplied her? She called a week later saying her fish were acting like they did when she first set up the tank, and her test kit showed zero chloramine. That’s the win we’re after.

Then there are whole-house systems, which I think get the least credit for how well they handle chloramine. Many homeowners don’t realize that chloramine isn’t just for drinking water – it’s in every drop that comes out of their shower, dishwasher, and washing machine. When you shower with chloramine, the small molecules vaporize, and you breathe them in – that’s why some people complain about dry skin or sinus irritation even if their drinking water is filtered. Our whole-house chloramine systems use a combination of catalytic carbon and a pre-treatment step that breaks down chloramine before it hits the carbon, so every drop in your home is free of it. I had a family come to us last winter saying their kid had eczema that flared up every time they took a bath. Within two weeks of installing our whole-house chloramine system, their pediatrician commented on how much clearer their kid’s skin was. That’s not a sales pitch – that’s real results from a system that targets chloramine specifically.

Now, let’s get to the myths I hear all the time, because that’s where people go wrong when choosing a purification system. First myth: boiling water removes chloramine. I wish that were true, but it’s not. Boiling might drive off a tiny bit of chlorine, but chloramine’s stability means most of it stays in the water – and if you boil it down, you’re left with even higher concentrations, which is the opposite of what you want. Second myth: UV light removes chloramine. UV is great for killing bacteria and viruses, and it can break down a little bit of chloramine, but not nearly enough to get it to safe levels. A UV system alone will leave most of the chloramine intact – that’s why it’s always paired with a carbon filter for chemical contaminants. Third myth: bottled water is free of chloramine. A lot of bottled water actually uses chloramine as a disinfectant too, and unless the bottle says it’s filtered with RO or reverse osmosis, there’s a good chance it still has chloramine in it. I once tested a popular brand of “natural spring water” that advertised no added chlorine – it had 1.2 ppm of chloramine. Oops.

So, does a purification system remove chloramine? The short answer is yes – but only if it’s the right system, designed specifically for that task. The worst thing you can do is buy any cheap system and assume it works for chloramine, like that pitcher filter I mentioned earlier. I tell every customer to start with a simple water test – you can pick up a basic test kit for a few dollars at most hardware stores, or we can send you a free one (no strings attached) to test for chlorine, chloramine, pH, and other common contaminants in your area. Once you know what you’re dealing with, we can guide you to the right system.

Let me also talk about maintenance, because even the best system won’t work if you don’t change the filters. I see this all the time: someone installs an RO system, then never changes the membrane, and wonders why chloramine starts showing up again. For our catalytic carbon systems, we recommend changing the filter every 6-12 months, depending on your water usage and chloramine levels. Whole-house systems might need filter changes every 12-18 months. We send out reminder emails (and even text alerts, if you opt in) so you don’t forget, and we keep replacement parts in stock for everyone we supply, so you don’t have to hunt for parts online.

Another thing I get asked: is chloramine harmful? I’m not a doctor, but I’ll stick to the EPA guidelines. The EPA allows up to 4 ppm of chloramine in drinking water, which is what most utilities use. For most people, that level is safe, but some folks are more sensitive: people with skin conditions, aquarium owners, people who drink a lot of tap water daily, and even people who use well water that might have other contaminants reacting with chloramine. We’ve had customers with thyroid issues who switched to our chloramine-removing systems because they noticed a difference in their energy levels – again, that’s anecdotal, but it’s the kind of feedback that makes me glad we focus on these specific systems.

If you’re still on the fence, let’s talk about when you might need a system for chloramine. If you’ve noticed that your tap water has a faint “medical” or “chemical” smell that’s different from old-school chlorine, that’s often chloramine. If you have dry skin or hair that gets worse in the shower, or if your fish are dying unexpectedly even when you treat your aquarium water, that’s another sign. Even if you don’t have those issues, switching to a chloramine-removing system is a good long-term investment, because chloramine can also damage water heaters, pipes, and even your washing machine’s components over time – removing it can extend the life of your home’s plumbing appliances.

At the end of the day, choosing a purification system isn’t about picking the cheapest option or the one with the shiniest marketing. It’s about picking something that actually addresses what’s in your water. As someone who’s been in this industry for years, I’ve seen too many people waste money on systems that don’t do what they promise, especially when it comes to chloramine. We design our systems with real-world use in mind – we test every batch, we use high-quality materials that don’t leach chemicals, and we stand behind every product we supply.

Combustion Gas Capture Device If you’re ready to figure out if a chloramine-removing purification system is right for you, we’re here to help. Whether you have a small apartment needing an under-sink system, a whole house that needs protection for every drop, or you’re an aquarium owner needing a specific setup, we can walk you through your options, answer any questions you have, and help you find a solution that fits your needs and your budget. Don’t guess when it comes to your water – take the first step to testing, and we’ll take care of the rest.

References

  1. U.S. Environmental Protection Agency. (2023). Disinfection Residuals in Drinking Water: Chloramine. EPA Office of Water.
  2. American Water Works Association. (2021). Water Treatment Principles and Applications, 6th Edition.
  3. World Health Organization. (2022). Chloramine in Drinking Water: Health Aspects and Treatment Options.
  4. National Sanitation Foundation. (2020). Standard 53: Drinking Water Treatment Units – Health Effects, Section 8.10 Chloramine Reduction.
  5. Water Quality Association. (2022). Chloramine Removal Technologies for Residential Water Treatment.

Xinxiang Jiale Intelligent Equipment Co., Ltd.
As one of the leading purification system manufacturers and suppliers in China, we also support customized service. Please feel free to buy high quality purification system for sale here from our factory. Contact us for more details.
Address: No.3913, 9th Floor, Unit 3, East Commercial and Office Complex, Baolong City Plaza, Hongqi District, Xinxiang City, Henan Province, China
E-mail: 1308567849@qq.com
WebSite: https://www.jialeasu.com/