Posted in

How to store a play structure when not in use?

If you’ve ever spent time around a residential or commercial play structure, you know how much joy they bring—from the youngest kids learning to climb to older groups racing down slides and swinging high. But for many of the play structure owners we work with, whether they’re a school district looking to off-season equipment or a family with limited backyard space, there comes a time when storing a play structure makes sense. As a play structure supplier, we’ve learned over years of working with both small family orders and large commercial accounts that proper storage isn’t just about keeping a structure out of the way—it’s about preserving safety, extending its lifespan, and ensuring it’s ready for another season of play when you take it out again. In this post, I’m breaking down the step-by-step process we share with every customer, backed by our on-the-ground experience and industry best practices, so you can store your play structure with confidence. Play Structure

First, let’s start with why storage matters more than just shoving a structure in a corner. Outdoor play structures are built to withstand rain, sun, and temperature swings, but extended exposure to the elements—even the mild off-season weather in many regions—can cause wear and tear that’s dangerous. UV rays can fade plastic components and make them brittle; trapped moisture can lead to mold on wood or rust on metal parts; and dragging a structure across a lawn or garage floor without protecting it can scratch finishes or bend structural poles. Last year, a local elementary school called us because they’d stored their 12-foot swing set in a covered shed for six months, only to find the metal chains had rusted so badly they needed full replacement, which could have been avoided with a few simple storage steps. That’s the kind of thing we want to help our customers skip.

The first critical step before any storage is to clean and inspect the structure thoroughly. You can’t put a dirty or damaged structure away and expect it to stay in good shape. Start by removing all loose items—plastic handles, toy bins, swing seats, and any small parts that can collect dirt or become damaged during storage. For cleaning, use a mild, non-abrasive soap and a soft brush or cloth; avoid harsh chemicals like bleach or ammonia, which can break down plastic and metal over time. Pay special attention to nooks and crannies: under slide rails, around the base of climbing poles, and in the gaps of wood planks where leaves, bugs, and mud can hide. Once cleaned, let every part dry completely—this is non-negotiable. Even a small damp spot on a wooden beam can turn into mold or rot over winter, and a little moisture on metal can lead to rust within a few months. We always recommend waiting 24 to 48 hours for full drying, depending on humidity levels in your area.

While you’re cleaning, this is also the perfect time for a quick safety inspection. Check for any loose bolts, splintered wood, cracked plastic, or bent metal. Tighten any loose fasteners with a wrench or screwdriver (we keep a play structure maintenance kit on hand for customers who need one) and sand down small splinters or sharp edges on wood before storage. If you spot a crack in a plastic slide, use a food-safe plastic adhesive (we test a few brands and recommend certain ones that work well for our structures) to seal it—ignoring small cracks can lead to larger breaks when the structure is moved to storage. Fixing these small issues now will save you from expensive repairs later, and it means when you take the structure back out, it’s as safe as it was when you first installed it.

Next, decide whether to take the entire structure apart or store it as a unit. This choice depends on your storage space, the size of your structure, and your ability to reassemble it correctly. For small, DIY-style play structures—like a 6-foot swing set or a small climbing frame for a backyard—taking it apart is usually the easiest option for tight storage spaces. For larger commercial structures, like a multi-level play tower with a slide and multiple swings, many customers opt to leave it assembled if they have a large enough covered space, but only if that space is dry and protected from extreme temperatures. Our rule of thumb: if you can move the structure easily (without needing heavy equipment) and can store it in a space that covers 100% of it, disassembling gives you more flexibility and reduces the risk of damage during movement.

If you decide to disassemble, take photos of every step as you go—this is a tip we can’t stress enough. It’s far easier to line up bolt holes and reattach parts if you have a visual guide instead of relying on written instructions alone. Label each bag of hardware (bolts, nuts, screws) with a piece of tape and a marker—for example, “Top Swing Set Bolts” or “Climbing Pole Hardware”—so you don’t mix up small parts in storage. It’s also a good idea to wrap metal parts (like swing chains or bolts) in a cloth or plastic bag to prevent scratches, and to pad plastic slides with a soft blanket to avoid scuffs during transport to storage.

For assembled storage, choose a space that’s temperature-controlled if possible. Extreme cold can make plastic and wood brittle, while excessive heat can warp plastic components. A garage, covered barn, or dedicated play structure storage shed is ideal—avoid open-air storage, even under a tarp, because wind and rain can seep in. If you have to use a tarp (for example, if you’re storing a small structure on a patio for a short period), choose a breathable, heavy-duty tarp—lightweight plastic tarps trap moisture and cause mold. Drape the tarp loosely over the structure, not tight against it, so air can circulate.

Once your structure is ready to store, position it in a way that protects vulnerable parts. For disassembled pieces, lay wooden planks flat to prevent warping, stack plastic parts (like slide and climbing wall panels) vertically if possible, or prop them against a wall to avoid bending. Metal parts should be stored elevated off the ground to prevent rust from contact with damp concrete or dirt—even a small piece of wood under a swing set frame can make a big difference. For assembled structures, make sure the base is on a flat, dry surface, and that nothing is leaning against the play structure that could scratch or press on a component. We’ve seen a customer store their 10-foot play tower next to a stack of lumber, and over the winter, the lumber scraped a deep mark into the tower’s plastic side—something they fixed with a touch-up paint pen, but a simple repositioning would have avoided.

Storage also depends on the material of your play structure, and that’s something we tailor advice for when customers come to us with specific products. Wooden play structures, for example, need extra attention to prevent rot. If you’re storing a wooden structure (or wooden components), we recommend sealing any cut edges with a wood sealant before storage—cut edges are the most likely spot for moisture to seep in and cause rot. Avoid storing wooden parts directly on damp ground, and if possible, treat them with a mildew-resistant spray before putting them away. Plastic play structures, on the other hand, should be protected from extreme cold: frozen plastic is far more likely to crack when moved, so if you’re storing plastic parts in a cold garage, bring them indoors for a day before reassembly to let them warm up slowly. Metal structures, like aluminum or steel swing sets, need protection from rust: wipe down all metal surfaces with a light coat of mineral oil before storage, and cover them to prevent contact with moisture. For galvanized steel structures, a quick wipe with a dry cloth is enough, but for uncoated steel, a thin layer of oil will go a long way.

No matter how carefully you store your play structure, it’s a good idea to check on it once or twice during the off-season, especially if storage is exposed to temperature swings. We had a customer who stored their structure in an unheated garage, and in late winter, when temperatures jumped above freezing for a few days, moisture built up inside the swing set frame, leading to small rust spots. A quick inspection caught it early, and a wire brush and touch-up paint fixed the issue before the structure was used again. Checking in also lets you make sure no rodents have made a home in your structure—small animals can chew through plastic or nest in wood, which can damage parts.

When it’s time to take your play structure out of storage, don’t rush the process. First, do another quick inspection: check for any new rust, mold, or damage that happened during storage. Wipe down all parts again, especially if you spot any mold or mildew, and make sure all hardware is tight before putting the structure back together. If you disassembled it, use the photos you took to guide you—lay out all parts in the same order they were stored, so you don’t miss any. Once assembled, give the structure a test run: swing gently on each swing, slide down the slide a few times, and climb the ladders to make sure everything is stable before letting kids use it.

Now, a few common mistakes we see customers make when storing play structures, to help you avoid them. The biggest one is skipping the drying step—many people clean their structure, dry it with a towel, and put it away, but even a tiny bit of trapped moisture can cause big problems. Another mistake is storing loose hardware in a bag without labeling it—we’ve had customers spend hours sorting through a pile of mixed bolts just to reassemble their structure. And finally, don’t store your structure with other heavy items on top of it—stacking boxes or tools on a play structure panel can bend or break plastic, metal, or wood parts.

As a play structure supplier, we know that your play structure is more than just equipment—it’s a place where kids build memories, learn to play outdoors, and stay active. That’s why we put so much focus on not just selling quality structures, but also giving our customers the knowledge to care for them. If you’re preparing to store your play structure and have questions specific to your product size or material, or if you’re looking for a new structure and want to discuss storage options tailored to your needs, we encourage you to reach out and connect. We’re here to help every step of the way, from installation to seasonal care.

For more information on play structure care and storage, we recommend consulting industry resources focused on outdoor recreational equipment safety, as proper storage plays a key role in maintaining compliance with safety standards. Additionally, manufacturer guidelines specific to your play structure’s materials will provide tailored guidance for long-term care.

Indoor Playground References:

  • Outdoor Play Equipment Safety Standards: Consumer Product Safety Commission Guidelines for Residential and Commercial Play Structures
  • Wood Preservation for Outdoor Structures: American Wood Council Best Practices for Wood Storage and Maintenance
  • Plastic Component Care for Play Equipment: National Association of Recreation and Park Professionals Guidelines for Durable Play Materials

Wenzhou Joyou Amusement Equipment Co., Ltd.
As one of the most professional play structure manufacturers and suppliers in China, we’re featured by quality products and good price. Please rest assured to buy customized play structure made in China here from our factory. Welcome to contact us for pricelist.
Address: Yangwan Industry Zone, Qiaoxia Town, Yongjia County, Wenzhou, Zhejiang, China
E-mail: joyou@wz-bhfs.com
WebSite: https://www.best-playground.com/